一文读懂:大型游戏机出口欧美认证测试标准解读

发布：2024-11-19 16:18，更新：2024-11-20 08:09

大型游戏机出口欧美认证测试标准解读：

游戏机UL22北美认证
测试条款：

Clause	Performance
33	STARTING CURRENT TEST
34	LEAKAGE CURRENT TEST
35	INPUT TEST
36	TEMPERATURE TEST
37	DIELECTRIC VOLTAGE-WITHSTAND TEST
38	SPILL TEST
39	PHYSICAL STABILITY TEST
40	HANDLE TEST
41 & 41.5	ABNORMAL OPERATION TEST
41 & 41.7	ABNORMAL OPERATION TEST
42	INTERNAL WIRING FLEXING TEST
43	STRIN RELIEF TEST
44	GROUNDING IMPEDANCE TEST
45.1	ELEVATED TEMPERATURE TEST FOR NONMETALLIC GUARDS AND MAINTENANCE AREA BARRIERS
45.2	IMPACT TEST FOR NONMETALLIC ENCLOSURES AND GUARDS
45.3	MECHANICAL STRENGTH TESTS FOR METAL ENCLOSURES AND GUARDS
45.4	MECHANICAL STRENGTH TESTS FOR ENCLOSURES, GUARDS AND MAINTENANCE AREAR BARRIES
46	SECONDARY CIRCUIT MOTOR TEST
47.1	HUMIDITY CONDITIONING TEST
47.2	RAIN CONDITIONING TEST

游戏机CE、CB认证：
IEC60335-2-82
测试条款：
Part 1:

Clause

Test Description

7.14	Marking Durability Test
22.11 & 22.34	Push, Pull and Torque Test
8.1.1 & 8.1.5	Protection Against Access to Live Parts
8.1.2	Protection Against Access to Live Parts
8.1.3	Protection Against Access to Live Parts
8.1.4	SELV or Protective Impedance
8.1.5	Appliances delivered in units, basic insulation
8.2	Class II protection
10.1& 10.2	Power Input / Current Deviation Measurements
11.8	Heating Test
13.2	Leakage Current Test
13.3	Electric Strength Test
14	Transient overvoltage
15.1	Protection Degree Against Moisture Test
15.2	Spillage Test
15.3	Humidity Test
16.2	Leakage Current Test
16.3	Electric Strength Test
17	Overload Protection, Temperature Test
19.2 & 19.3	Abnormal Operation – Restricted Heat Dissipation & Overload Test
19.4	Abnormal Operation - Thermostat Short-Circuited Test
19.5	Short-Circuited the Sheath and N conductor
19.6	Abnormal Operation - PTC
19.7	Locking Test for the Motor
19.8	3-Phase Motor
19.10	Abnormal Operation - Over Speed Test
19.11& 19.12	Abnormal Operation –Fault Conditions of Electronic Circuit
19.11.4	Abnormal Operation - Electromagnetic Phenomena
19.14	Contactor/relay contact SC tests
19.15	Voltage selector switch test
20.1	Stability Test
20.2 & 21.1	Mechanical Hazards and Impact Test
21.2	Mechanical Strength of Accessible Insulation
22.3	Undue Strain Test on Socket-Outlet
22.5	Plug Discharge Test
22.6	Water Leakage Test
22.12	Pull Test
22.16	Cord Reel Abrasion Test
22.32	Rubber Oxygen Bomb Test
22.47	Water Mains Pressure Test
23.3	Internal Wiring Flexing Test
23.5	Insulation of Internal Wiring Test
24.5	Capacitor Voltage
25.14	Cord Flexing Test
25.15	Power Cord Pull and Torque Test
27.5	Ground Impedance Test
28.1	Screw Torque Test
29	Creepage Distance and Clearance
30.1	Ball Pressure Test
30.2	Glow Wire Test
30.2	Needle Flame Test
Annex B	Appliance Powered by Rechargeable Batteries
Annex D	Motor with Thermal Protectors
Annex H	Switch Endurance Test
Annex I	Motors having basic insulation that is inadequate for the rated voltage of the appliance
Annex N	Proof Tracking Test

Part 2:

Clause

Test Description

20.1	Stability Test
20.2 & 21.1	Mechanical Hazards and Impact Test
22.101	Failure of Interlock and resetting of thermal cut-out
22.102	Access to service area
22.103	Laser
22.104	Hazard from coin box and container
23.102	Internal wiring

高准检验认证始终专注于检测与认证服务领域，秉承以客户需求为中心，为客户提供全面优质的技术服务和解决方案的经营理念，力争用心做好每一个细节，高效协助客户一次性申请获得多国的检测报告及认证证书。

其他新闻

联系方式

地址：广东博罗县石湾镇宏明西路北侧一品中央珑园13栋
电话：0752-6388386
经理：田经理
手机：13728142614
传真：-
微信：13728142614

站内搜索